A-A-51264
The gown shall have full length raglan sleeves, or full length set-in sleeves attached by sewing. The sleeves shall have wristlets made of tubular knit polyester fabric.
The gown shall be fabricated from a soft, pliable, fluid resistant nonwoven material. The material shall have good resistance to dry-particle penetration. The material shall have high breathability, and shall be comfortable to wear for long periods of time. The color of the material shall be a light pastel shade of blue, green or blue-green. The gown shall meet the following requirements:
Hydrohead 35 cm minimum
Spray impact 3 grams maximum
Bacterial filtration efficiency (BFE) 90 percent
Each gown shall be supplied with a scrim re-enforced, nonwoven absorbent towel. The towel shall have minimum dimensions of 15 by 19-1/2 inches.
The gowns and bowels shall be folded and overwrapped in a white nonwoven or plastic fabric. The folded and wrapped gowns and towels shall be packaged in a white Kraft heat-sealed bag which is tear resistant and which will allow aseptic handling and maintain sterility of the contents until opened or damaged.
The surgical gowns and towels in their immediate container shall be sterile.
Workmanship. The operating gown with towel shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Package (PG). One package containing 32 large gowns with towels for NSN 6532-01-187-7760 or 28 large gowns with towels for NSN 6532-01-146-4269, as specified, constitutes one unit.
Quality Assurance Provision.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection, examination, and test requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved’ by the Government. The Government reserves the right to perform any of the inspections, examinations, or tests set forth in this description where such inspections, examinations, and tests are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business