A-A-54373
following physical requirements after 20 washing and drying cycles, using AATCC Test Method 124, or comparable washing and drying procedures:
|
Fabric weight, oz/sq. yd. minimum |
3.5 |
|
Yarns per square inch, minimum: |
160 |
|
Breaking strength, pounds minimum: |
|
|
Warp |
50 |
|
Filling |
50 |
|
PH |
5.0 to 8.5 |
|
Dimensional stability, percent maximum: |
|
|
Warp |
2.0 |
|
Filling |
2.0 |
|
Color fastness to: |
|
|
Laundering (AATCC 61-1980 IVA) |
Fair |
|
Light |
Fair |
The fabric shall be cut to assure shade matching of the component parts of the finished robe.
All major joining seams to be made with mock serge stitch type 512 with EI-10 stitches per inch. All single needle stitching to be stitch type 301 with 8-10 stitches per inch. All points of stress are to be bartacked with no less than 28 stitches per tack.
The thread shall be 100 percent spun polyester or polyester core, cotton wrapped, fully stabilized and closely matching the color of the material.
The robes shall have a label indicating size, fiber content, and permanent care laundering instructions. The label shall be printed in permanent ink and attached at the back of the neck
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business